PARQUETRY & PLYWOOD ADHESIVE
DURAPRO AF0033 is a high-solids latex based adhesive used for direct glue-down of 12”x12” finger strips parquet made of maple, oak or birch, on T&G floor grade plywood or cured concrete slab. DURAPRO AF0033 is also used for bonding underlayment plywood to subfloor.
– EASY TO TROWEL
– EXCELLENT WORKING TIME
– SUPERIOR SHEAR STRENGTH
APPLICATION: For interior use only. Adhesive is ready to use, no mixing required. Spread adhesive with an appropriate ‘’V’’ notched trowel held at 45° angle. For laying parquet, use a 5mm (3/16’’x3/16’’x3/16’’) trowel; for laying plywood, use a 3mm (1/8’’x1/8’’/1/8’’) trowel. Spread the adhesive evenly over an area that can be covered in 15 minutes. Install parquet or plywood while adhesive is wet. For plywood, no waiting is required to proceed with nailing or screwing. Leave a minimum space of 6mm (1/4’’) uncovered along walls and permanent structures to allow for wood expansion. Press firmly into adhesive. Check for adhesive transfer to the back of the parquet. Let dry 24 hours before allowing foot traffic and 48 hours before moving objects.
COVERAGE by 15L: 30 m2 (320 p.c.) with a 3mm trowel; 22.3 m2 (240 p.c.) with a 5mm trowel.
available in 3.78 L & 15 L pails