Construction adhesives

AC SERIES
Residential

Whatever the type of panels you have to install, there is a DURA PRO® adhesive to suit your needs. DURA PRO® AC SERIE for the construction includes adhesives for the installation of subfloors, high pressure laminates (HPL) such asArborite® and Formica®, Non-fiberglass reinforced panel ( NRP) such as Plas-Tex® , Decorative panels such as DPI®, designer tile panels such as Barker-Tile®, and extruded polystyrene insulation sheets such as STYROFOAM™. DURA PRO® AC SERIE includes adhesives for concrete, pavers and retaining walls. Please refer to our list in this section to select the appropriate adhesive.

AC0054

Foamboard Adhesive

AC0054

Description

DURAPRO AC0054 is a non-flammable latex based adhesive for the installation of insulation panels made of polystyrene or polyurethane (blue, green, pink, white, etc.) to interior walls of concrete, concrete blocks, masonry, gypsum or wood. AC0054 will not attack any brand of polystyrene foam (Styrofoam™, Isolofoam™, Celfort™).

Available in the following sizes: 300 ml, 825 ml, 3.78 L and 15.0 L

AC0055

Construction & Panel Adhesive

AC0055

Description

DURAPRO AC0055 is a high solids adhesive for the installation of wall panels (including FRP and Plas-Tex® NRP®), baseboards, mouldings (including MDF), cork and acoustic tiles. AC 0055 is also used for sub-floor assembly, installation of foam insulating boards and gluing metal corners to gypsum boards. Meets the CGSB specification #71-26 M88.

Available in the following sizes: 300 ml, 825 ml, 3.78 L and 15.0 L

AC0616

Concrete Weld

AC0616

Description

DURAPRO AC 0616 is synthetic resin for interior or exterior use, designed to increase the bonding properties of concrete. It promotes intercoat adhesion between old and new concrete. Used as an additive to portland cement mixe, AC 0616 improves adhesion and reduce cracking in toppings, brick walls, patching or resurfacing concrete walls, floors or ramps. May also be used for stucco and plaster applications.

Available in the following sizes: 1 L, 4 L, 18.9 L and 205 L

AC1875

Spray Grade Contact Cement

AC1875

Description

DURA PRO AC 1875 is a spray grade neoprene rubber adhesive in a volatile solvent used for bonding decorative laminates (Arborite®, Formica®), wood and plastics veneers, paneling, cork, carpet, fabrics, sheet metal andother combinations of these to wood, plywood, particle board or metal. Forms a durable permanent bond when parts are assembled and momentary pressure is applied.

Available in the following size: 18.9 L

AC1920

Contact Cement

AC1920

Description

DURA PRO AC 1920 is a neoprene rubber adhesive used for bonding decorative laminates (Arborite®, Formica®), wood and plastics veneers, paneling, cork, carpet, fabrics, sheet metal and other combinations of these to wood, plywood, particle board or metal. Forms a durable permanent bond when parts are assembled and momentary pressure is applied.

Available in the following sizes: 236 ml, 950 ml, 3.78 L, 10 L and 18.9 L

AC2095

Spray Grade Contact Cement

AC2095

Description

DURA PRO AC 2095 is a spray grade neoprene rubber adhesive in a volatile
solvent used for bonding decorative laminates (Arborite®, Formica®), wood and plastics veneers, paneling, cork, carpet, fabrics, sheet metal and other combinations of these to wood, plywood, particle board or metal. Forms a durable permanent bond when parts are assembled and momentary pressure is applied.

Available in the following size: 18.9 L

AC2389

Latex Contact Cement- GREEN

AC2389

Description

DURA PRO AC 2389 is a water-based adhesive used for bonding decorative
laminates (Arborite®, Formica®), polyurethane foam, polystyrene foam and fabrics to wood, plywood or particle board. It has a long open-time, good contactibility under low pressure, excellent green strength, high shear and peel strength. Its flowability and high solids content allow to spread easier and to cover up to three times the surface area than a solvent based contact cement.

Available in the following sizes: 950 ml, 3.78 L and 18.9 L

AC3471

Latex Contact Cement – WHITE

AC3471

Description

DURAPRO AC3471 is a water-based adhesive designed for bonding high pressure laminates panels (HPL), polyurethane foam, polystyrene foam and fabrics to wood, plywood or particle board. AC3471 has a long open-time, good contactibility under low pressure, excellent green strength, high shear and peel strength, and superior hot creep resistance. Its owability and high solids content allow to spread easier and to cover up to three times the surface area than a solvent based contact cement.

Available in the following sizes: 950 ml, 3.78 L and 15 L